Columbine |
http://www.agardenforthehouse.com/2011/11/winter-sowing-101-6/
http://www.wintersown.org/
Making the containers to sow the seeds was pretty easy. We had a massive collection of used milk jugs from our maple syrup operation. I only used the clear ones with caps. Any clear container with a cap will work for this project. That's all you have to do is:
Sunny side of the house |
1. Poke 3-5 drainage holes on the bottom of the milk jug
2. Cut the milk jug in half, leaving the handle as a hinge
3. Use a single hand held paper hole punch to make holes to twist tie the top and
bottom of the jug together (optional, you can just use tape if you want)
4. Place a seed starting soil in the bottom portion of the jug and dampen the soil
5. Plant your seeds and cover with a light layer of soil, press down to make good
soil and seed contact. Label the container with a Sharpie or a paint pen.
6. Gently water the soil if it's still a bit dry
7. Use twist ties, or tape to be easy, to secure the top and bottom portions of the
container. Keep it closed until the weather warms.
8. Once the snow melts, every so often, check to see if they need water. I watered
them by taking the cap off and gently sprinkling water in the cap hole. The soil
dries up fast so try to keep and eye on them. If it gets too warm, open the containers so you do not cook
your seedlings.
Foxglove |
No comments:
Post a Comment